GE AF-300 P11 User Manual

Contents

4-11Data subject to change without notice 7/07. © 2007 GE Drives4.3.11 Alarm InformationSelect 7. Alarm Information (ALM INF) on the Program Menu screen. A variety of operating data at the time the latestalarm occurred is displayed. Use UP and DOWN to switch between the nine screens of alarm information data.60.001.DATA SETTING2.DATA CHECK3. OPR MNTR4. I/O CHECK5. MAINTENANCE6. LOAD FCTR> 7. ALM INF60.00 OC1Fout=xxxx.xHzIout=x.xxAVout=xxxVTRQ=xxx%Code of latest alarm(High speed blinking during alarmmode only)Output frequency at alarmOutput current at alarm occurenceOutput voltage at alarm occurenceTorque calculation value at alarmoccurenceRUNPRG > PRG MENUF/D > LED SHIFTFWDOC1TIME=xxxxxhEDC=xxxVTMPI=xxxx∞CTMPF=xxxx∞CCumulative operating hours at alarm occurenceDC link circuit voltage at alarm occurenceTemperature inside drive at alarm occurenceHeat sink temperature at alarm occurenceFref=xxxx.xHzxxx xx xx xxOC1Setting frequency at alarm occurenceOperating status at alarm occurenceFWD/REV: RotatingIL: Current limitingVL: Voltage limitingLU: Under voltageTL: Torque limitingOC1REM X2 X6FWD X3 X7REV X4 X8X1 X5 X9SIGNAL OFF, SIGNAL ONInput terminal status at a alarmoccurence (terminals)No. of communication errors atalarm occurence: Keypad panelNo. of communication errors atalarm occurence: RS 485No. of communication errors atalarm occurence: OptionsOC1NRK=xxxxxNRR=xxxxxNRO=xxxxxInput terminal status at a alarmoccurence (communication)SIGNAL OFF, SIGNAL ONOC1COM X2 X6FWD X3 X7REV X4 X8X1 X5 X9Output terminal status at a alarmoccurenceSIGNAL OFF, SIGNAL ONOC1Y1 Y5Y2Y3Y4 OC10/1 =xxx xxx-1 =xxx xxx-2 =xxx xxx-3 =xxx xxxPrevious alarmBefore previous alarmTwo times before previousNo. of occurencesAlarm historyNo. of occurencesUpdated at alarm occurence. If thecause of an alarm is the same as theprevious one, only the number ogoccurences is incremented.Multiple alarms(Simultaneouslyoccuring alarms)Alarm codeUp to four alarm codes can be dosplayed simultaneously.OC15=xxx4=xxx3=xxx2=xxxLastest alarmPRGFUNCDATA