GE AF-300 P11 User Manual

Contents

4-5Data subject to change without notice 7/07. © 2007 GE Drives4.3.3 Switching to LED Digital MonitorDuring normal operation, press FUNCDATA to switch to LED monitor display. When monitored data is switched, the LEDmonitor contents are displayed. When power is turned on, the monitor contents set by the function (E43) are displayedon the LED.4.3.4 Program Menu ScreenThe Program Menu screen is shown below. Only four items can be displayed simultaneously. Move the cursorwith or to select an item, then press FUNCDATA to display the next screen.4.3.5 Setting Function DataOn the Program Menu screen, select 1. Data Setting. The Function Select screen appears with function codes andnames on it. Select the desired function.60.00 60.0060.0060.00RUNPRG PRG MENUF/D LED SHIFT1. DATA SETTING2. DATA CHECK3. OPR MNTR4. I/O CHECKF00 DATA PRTCF01 FREQ COM 1F02 OPR METHODF03 MAX Hz-1F01 FREQ COM 100-11Function Code Function Name Data Setting Range Data1. DATA SETTING2. DATA CHECK3. OPR MNTR4. I/O CHECK5. MAINTENANCE6. LOAD FCTR7. ALM INF8. ALM CAUSE9. DATA COPYDISPLAY4. I/O CHECK5. MAINTENANCE6. LOAD FCTR7. ALM INFWhen running Unit Remarks(E44 = 0) (E44 = 1) (E44 = 0.1)0 Setting frequency Hz1 Setting frequency2 Setting frequency3 Output current A4 Output voltage V(specified value)5 Synchronous r/min.speed settingvalue6 Line speed m/min.setting value7 Load rotation r/min.speed settingvalue8 Torque calculation % ± indicationvalue9 Power kWconsumption10 PID setting value —11 PID remote —setting value12 PID feedback value —E43PID remote setting valuePID feedback valueFor 4 digits or more, the lasrdigits are cut, with x10, x100marked on the indicator.Displayed only when PID iseffective in PID operationselection.Power consumptionPID setting valueLoad rotation speedTorque calculation valueLine speedOutput currentOutput voltage (specified value)Synchronous speedWhen stoppingOutput frequency 1 (before slip compensation)Output frquency 2 (after slip compensation)Setting frequencyPRG FUNCDATAFUNCDATA