Critical PowerModifications reserved Page 36/146GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx User Manual TLE Series 600 & 800 CE S15.6 UNPACKINGMove the equipment in it’s original packing, carton box or wooden case, until the place of installationand remove the packing and the transport sockets only just before installing the UPS.Be aware of the heavy weight of the UPS, pay attention when moving the UPS cabinet.White colour = without any anomalyRed colour = anomaly evidenceThe package of the TLE Series 600 & 800is equipped with ShockWatch (indicatorfor shock), and TiltWatch (indicator foroverthrow) on the outside.These devices indicate an eventual shockor overthrow during transport.Whenever these devices show apossible anomaly, the UPS shall not becommissioned before consulting a“Service Centre”.Fig. 5.6-1 ShockWatch deviceFig. 5.6-2 TiltWatch deviceNOTE !Be aware of the heavy weight of the UPS, pay attention when moving the UPScabinet.Take care not to damage the UPS when moving by forklift.Included in the delivery you can find the following parts: An accessories bag. Air inlet grids, which must be mounted on the bottom of the cabinet UPS with the screws included. Bus bars interconnection “Power Section cabinet” and “In/Out Module cabinet”. Junctions metal parts to connect “Power Section cabinet” and “In/Out Module cabinet”. XD1 (46P) & XD2 (32P) control cables interconnection. Control Bus cables for inter-connecting the UPS modules (only for the RPA system). The documentation includes the “User Manual” and the “UPS Safety Rules”.PACKING MATERIAL RECYCLINGGE’s Critical Power, in compliance with environment protection, use onlyenvironmentally friendly material.UPS packing materials must be recycled in compliance with all applicableregulations.
