GE TLE series 600 User Manual

Contents

Critical PowerModifications reserved Page 83/146GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx User Manual TLE Series 600 & 800 CE S1Code Alarm Description4106 RECTIFIER TRANSFORMEROVERTEMPERATUREThe temperature sensor inside the inputtransformer winding indicatesovertemperature.Only the alarm is given.The Rectifier, when in an Off state, cannot startas long as this condition persists.4110 RECTIFIER MAINS OUT OF TOLERANCE Rectifier Mains Input is out of tolerance(voltage, frequency or phase sequence).4115 LOW BATTERY VOLTAGEThe Battery has been discharged and reached“stop operation” time-out (default 3 minutes),and the Inverter will be shut down.It will restart automatically only when theBattery has recharged enough for a minimumruntime.4116 HIGH BATTERY VOLTAGEDangerous high DC Voltage caused invertershut-down.Inverter restarts automatically after Batteryreturns to floating voltage.4117 BATTERY EARTH FAULT A leakage current to earth has been detectedon the DC circuit.4118 BATTERY FAULTDuring battery test the voltage falls under thecritical level (depending setting parameters).Battery test is stopped.4121 HIGH DC RIPPLE A high ripple is present in the battery voltage.4125 HIGH DC-LINK VOLTAGEDetection of high voltage on the DC-link.The rectifier, booster and inverter will switch offfor protection purposes.The rectifier may only be switched on again ifthe DC-Link’s voltage value falls below 430V.4126 4th LEG CONTROL SATURATION (Imax) The current in the fourth leg has reached itshighest value.4130 TURN ON RECT. OR SHUTDOWN UPSRectifier and Inverter are OFF.The DC power supply is discharging theBattery.Rectifier must be restarted or Battery must bedisconnected in order to avoid damage.4140 RECTIFIER CONTROL FAILURERectifier Voltage hasn’t reached the set value(probably fault on regulation loop).LED Rectifier on control panel is blinking.4141 ISMAX DETECTION RECTIFIERAfter 3 IS-Max condition within the time framespecified in respective parameter, the Rectifierremains shut-down.4142 RECTIFIER CURRENT MAXWill cause immediate shut-down of theRectifier.Based on the value inserted in the respectiveparameter.4143 BOOSTER/BATTERY CHARGER CURRENTMAXDetection of maximum current in thebooster/battery charger.The Booster/Battery charger and Inverter willswitch off for protection purposes.