Section 4 • Repair ProceduresPart No. 122985 S-80 • S-85 • S-80X 4 - 57February 2012MANIFOLDS8-11Drive Oil Diverter Manifold Components (welder option)The oil diverter manifold is mounted to the hydraulic generator located in the engine compartment.Index SchematicNo. Description Item Function Torque1 Directional Valve ............................ CU ........... Diverter valve ............................... 80-90 ft-lbs / 108-122 Nm2 Orifice disc, 0.031 inch / 0.8 mm .... CV ........... Delays shift to drive3 Solenoid valve ............................... CW .......... Pilot valve to diverter ....................... 35-40 ft-lbs / 47-54 Nm4 Relief valve .................................... CX ........... Charge pressure circuit ................... 35-40 ft-lbs / 47-54 Nm5 Pressure switch .............................. CZ ........... Power to relay .............................................. 16 ft-lbs / 22 Nm6 Connector ........................................ --- ............ For pressure switch ..................................... 11 ft-lbs / 15 Nm7 Check valve .................................... CY ........... Prevents oil to generator ................. 35-40 ft-lbs / 47-54 NmCYCXCUCVCW1347265 CZ
