Section 4 • Repair ProceduresPart No. 122985 S-80 • S-85 • S-80X 4 - 9February 2012Platform Components2-1PlatformHow to Remove the Platform1 Remove the cable clamp from the top of theplatform mounting weldment.2 Remove the mounting fasteners from the powerto platform outlet box bracket. Lay the outletbox and bracket assembly off to the side. Donot disconnect the wiring.3 Remove the foot switch mounting fasteners.4 Remove the cover plate from the bottom of thefoot switch to access the foot switch wireterminals.5 Tag and disconnect the foot switch wiring fromthe foot switch. Remove the cable from theback of the platform.Electrocution/burn hazard. Contactwith electrically charged circuitscould result in death or seriousinjury. Remove all rings, watchesand other jewelry.6 Remove the platform control box mountingfasteners. Lower the control box and set itaside.Component damage hazard.Cables can be damaged if theyare kinked or pinched.Note: If your machine is equipped with an airline toplatform option, the airline must be disconnectedfrom the platform before removal.7 Support and secure the platform to anappropriate lifting device.8 Remove the platform mounting fasteners andremove the platform from the machine.Crushing hazard. The platformcould become unstable and fallwhen it is removed from themachine if not properly supported.
