S-80 • S-85 • S-80X Part No. 1229852 - 2Section 2 • Specifications February 2012SPECIFICATIONSContinuous improvement of our products is aGenie policy. Product specifications are subjectto change without notice.Hydraulic Oil SpecificationsHydraulic Oil SpecificationsHydraulic oil type Chevron Rando HD MV equivalentViscosity grade Multi-viscosityViscosity index 200Cleanliness level, minimum 15/13Water content, maximum 200 ppmChevron Rando HD MV oil is fully compatible andmixable with Shell Donax TG (Dexron III) oils.Genie specifications require hydraulic oils which aredesigned to give maximum protection to hydraulicsystems, have the ability to perform over a widetemperature range, and the viscosity index shouldexceed 140. They should provide excellent antiwear,oxidation, corrosion inhibition, seal conditioning, andfoam and aeration suppression properties.Optional fluidsBiodegradable Petro Canada Environ MV46Statoil Hydra Way Bio Pa 32BP Biohyd SE-SFire resistant UCON Hydrolube HP-5046Quintolubric 822Mineral based Shell Tellus T32Shell Tellus T46Chevron Aviation APerformance SpecificationsDrive speed, maximumStowed position 40 ft / 7.9-8.5 secRT Tires 12.2 m / 7.9-8.5 secStowed position 40 ft / 11-13 secFlotation Tires 12.2 m / 11-13 secRaised or extended position 40 ft / 40-45 sec12.2 m / 40-45 secBraking distance, maximumHigh range on paved surface 3 ft90 cmGradeability Refer to the Operator’s ManualBoom function speeds, maximumfrom platform controlsJib boom up (S-85) 25 to 35 secondsJib boom down (S-85) 15 to 25 secondsBoom up (ANSI, CSA, AS models) 57 to 65 secondsBoom up (CE models) 75 to 83 secondsBoom down (ANSI, CSA, AS models) 61 to 69 secondsBoom down (CE models) 75 to 83 secondsBoom extend 59 to 67 secondsBoom retract 57 to 65 secondsTurntable rotate, 360° 95 to 103 secondsboom fully stowedTurntable rotate, 360° 210 to 250 secondsboom raised or extendedPlatform rotate, 160° 8 to 12 secondsPlatform level up 50 to 60 secondsPlatform level down 40 to 50 seconds
