Part No. 75861 Genie Z-60/34 3 - 11November 2003 Section 3 • Scheduled Maintenance ProceduresREV AA-9Perform 30 Day ServiceThe 30 day maintenance procedure is a one timesequence of procedures to be performed after thefirst 30 days or 50 hours of usage, whichevercomes first. After this interval, refer to themaintenance tables for continued scheduledmaintenance.1 Perform the following maintenance procedures:• A-10 Perform Engine Maintenance -Ford Models• A-13 Grease the Turntable Rotation Bearingand Rotate Gear• B-7 Check the Lug Nut Torque(including tires and wheels)• B-9 Check the Oil Level in the Drive Hubs• B-21 Replace the Hydraulic Filters• C-1 Perform Engine Maintenance -Deutz Models• D-2 Check the Turnable Rotation BearingBoltsCHECKLIST A PROCEDURESA-10Perform Engine Maintenance -Ford ModelsEngine specifications require thatthis procedure be performed every100 hours. Perform this proceduremore often if dusty conditions existor the machine is subjected toextended low idle operation.Proper engine maintenance, following the enginemanufacturer's maintenance schedule, is essentialto good engine performance and service life. Failureto perform the maintenance procedures can lead topoor engine performance and component damage.Required maintenance procedures and additionalengine information are available in theFord LRG-425 EFI Operator Handbook(Ford part number FPP 194-302).Ford LRG-425 EFI Operator HandbookGenie part number 77831To access the engine:1 Remove the two engine pivot plate retainingbolts. Swing the engine pivot plate out awayfrom the machine and secure it from moving.Crushing hazard. Failure to securethe engine pivot plate from movingcould result in death or seriousinjury.
