Part No. 75861 Genie Z-60/34 3 - 27November 2003 Section 3 • Scheduled Maintenance ProceduresREV AB-14Test the Engine Idle SelectA properly operating engine idle select switchis essential to good engine performance and safemachine operation. There are two settings.Foot switch activated low idle (turtle symbol)allows the operator to control individual boomfunctions only. Drive functions will operate at lowidle.Foot switch activated high idle (rabbit symbol)should be used for normal machine operation. Thisselection activates high idle only when the footswitch is pressed down.1 Pull out the red Emergency Stop button to theon position at both the ground and platformcontrols.2 Start the engine from the ground controls thenmove the function enable toggle switch to thehigh idle (rabbit symbol) position and hold in theon position.Result: The engine should change to high idle.3 Release the function enable toggle switch.Result: The engine should return to low idle.4 Turn the key switch to platform controls.5 Move the engine idle control switch to footswitch activated high idle (rabbit symbol).Result: The engine should not change tohigh idle.6 Press down the foot switch.Result: The engine should change to high idle.7 Move the engine idle control switch to footswitch activated low idle (turtle symbol).Result: The engine should change to low idle.CHECKLIST B PROCEDURES
