3 - 20 Genie Z-60/34 Part No. 75861November 2003Section 3 • Scheduled Maintenance ProceduresREV ACHECKLIST B PROCEDURES4 Inspect for exhaust leaks; i.e., carbon builduparound seams and joints.Ford models:5 Swing the engine pivot plate in towards themachine.6 Install the bolts that were just removed into theoriginal holes to secure the engine pivot plate.Crushing hazard. Failure to installthe bolts into the engine pivot plateto secure it from moving couldresult in death or serious injury.B-5Check the Exhaust SystemMaintaining the exhaust system is essential togood engine performance and service life. Runningthe engine with a damaged or leaking exhaustsystem can cause component damage and unsafeoperating conditions.Bodily injury hazard. Do notinspect while the engine is running.Remove the key to secure fromoperation.Burn hazard. Beware of hot enginecomponents. Contact with hotengine components may result insevere burns.Ford models:1 Remove the two engine pivot plate retainingbolts. Swing the engine pivot plate out awayfrom the machine and secure it from moving.Crushing hazard. Failure to securethe engine pivot plate from movingcould result in death or seriousinjury.All models:2 Be sure that all nuts and bolts are tight.3 Inspect all welds for cracks.
