93display pppoe-client session summaryUse display pppoe-client session summary to display summary PPPoE session information.Syntaxdisplay pppoe-client session summary [ dial-bundle-number number ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersdial-bundle-number number: Specifies the dialer bundle number corresponding to a P PPoEsession, in the range of 0 to 1023. If you do not specify this option, t he command displays summaryinformation for all PPPoE sessions.Examples# Display summary information for all PPPoE sessions. display pppoe-client session summaryBundle ID Interface VA RemoteMAC LocalMAC State1 1 GE1/0/1 VA0 00e0-1400-4300 00e0-1500-4100 SESSION2 1 GE1/0/2 VA1 00e0-1500-4300 00e0-1600-4100 SESSIONTable 16 Command outputField DescriptionBundle Dialer bundle to which the PPPoE session belongs.Interface Ethernet interface where the PPPoE session is present.VA Virtual access interface created for the PPPoE session.RemoteMAC MAC address of the remote end.LocalMAC MAC address of the local end.StatePPPoE session state:• IDLE—Initialization state.• PADI SENT—A PPPoE Active Discovery Initiation (PADI)packet has been sent, and a PPPoE Active Discovery Offer(PADO) packet is being expected.• PADR SENT—A PPPoE Active Discovery Request (PADR)packet has been sent, and a PPPoE Active DiscoverySession-confirmation (PADS) packet is being expected.• SESSION—The PPPoE session has been successfullyestablished.pppoe-clientUse pppoe-client to establish a PPPoE session and specify the dialer bundle corresponding to thesession.Use undo pppoe-client to remove a PPPoE session.
