75• If the cn-163 keyword is specified, the PPPoE server automatically inserts the correspondingBAS information before the parsed circuit-id. Then it sends the combination of the bas-info andcircuit-id as the nas-port-id attribute to the RADIUS server.• If the cn-163 keyword is not specified, the PPPoE server creates a new circuit-id inChina-Telecom format. Then it sends the new circuit-id as the nas-port-id attribute to theRADIUS server. The new circuit-id contains the corresponding BAS information and theDSLAM user access information in the original circuit-id.If this command is not executed, the nas-port-id attribute that the PPPoE server delivers to theRADIUS server is determined by the pppoe-server access-line-id content command.The RADIUS server cannot correctly parse anas-port-id attribute that includes the remote-id andBAS information. When you configure this command together with the pppoe-server access-line-idtrust command, make sure the nas-port-id attribute sent to the RADIUS sever does not include theremote-id.Examples# Configure the nas-port-id attribute to automatically include BAS information on GigabitEthernet1/0/1. system-view[Sysname] interface gigabitethernet 1/0/1[Sysname-GigabitEthernet1/0/1] pppoe-server access-line-id bas-infoRelated commandspppoe-server access-line-id circuit-id parse-modepppoe-server access-line-id contentpppoe-server access-line-id trustpppoe-server access-line-id circuit-id parse-modeUse pppoe-server access-line-id circuit-id parse-mode to configure the format that an interfaceuses to parse the circuit-id in the access line ID.Use undo pppoe-server access-line-id circuit-id parse-mode to restore the default.Syntaxpppoe-server access-line-id circuit-id parse-mode { cn-telecom | tr-101 }undo pppoe-server access-line-id circuit-id parse-modeDefaultAn interface uses the TR-101 format to parse the circuit-id.ViewsLayer 3 Ethernet interface/subinterface viewLayer 3 virtual Ethernet interface/subinterface viewVLAN interface viewLayer 3 aggregate interface/subinterface viewVE-L3VPN interface/subinterface viewEFM interface/subinterface viewPredefined user rolesnetwork-admin
