352Parametersinterface interface-type interface-number: Specifies an interface by its type and number. It can be amain interface or subinterface.• If you specify a main interface, this command clears information for the main interface and itssubinterfaces.• If you specify a subinterface, this command clears information for the subinterface.• If you do not specify an interface, this command clears information for all interfaces.dlci dlci-number: Specifies a VC by its DLCI in the range of 16 to 1007. DLCIs 0 through 15 and 1008through 1023 are reserved.• If you specify a main interface and a VC that is not on the main interface or any of itssubinterfaces, this command does not clear IPv6 address mapping for the VC.• If you specify a subinterface and a VC that is not on the subinterface, this command does notclear IPv6 address mapping for the VC.• If you specify only an interface, this command clears IPv6 address mapping for all VCs on theinterface.Examples# Clear all dynamic IPv6 address-to-DLCI maps. reset fr ipv6 indreset fr pvcUse reset fr pvc to clear statistics for PVCs.Syntaxreset fr pvc [ interface interface-type interface-number [ dlci dlci-number ] ]ViewsUser viewPredefined user rolesnetwork-adminParametersinterface interface-type interface-number: Specifies an interface by its type and number. It can be amain interface or subinterface. If you specify a main interface, this command clears statistics for themain interface and its subinterfaces. If you specify a subinterface, this command clears st atistics forthe subinterface. If you do not specify an interface, this command clears statistics for all interfaces.dlci dlci-number: Specifies a VC by its DLCI in the range of 16 to 1007. DLCIs 0 through 15 and 1008through 1023 are reserved.Examples# Clear statistics for all PVCs on Serial 2/1/0. reset fr pvc interface serial 2/1/0snmp-agent trap enable frUse snmp-agent trap enable fr to enable SNMP notifications for Frame Relay.Use undo snmp-agent trap enable fr to disable SNMP notifications for Frame Relay.Syntaxsnmp-agent trap enable fr
