365Predefined user rolesnetwork-adminExamples# Enable MFR encapsulation on interface Serial 2/1/0. system-view[Sysname] interface serial 2/1/0[Sysname-Serial2/1/0] link-protocol mfrRelated commandsfr mfrmfr bundle-nameUse mfr bundle-name to set a bundle name.Use undo mfr bundle-name to restore the default.Syntaxmfr bundle-name nameundo mfr bundle-nameDefaultThe bundle name is represented by MFR plus the bundle number, for example, MFR0/0/2.ViewsMFR interface viewPredefined user rolesnetwork-adminParametersname: Specifies a bundle name, a case-sensitive string of 1 to 49 characters.Usage guidelinesYou cannot set a bundle name as a string in the form of MFR + number.Each MFR bundle has a bundle name, and the peer device can identify an MFR bundle by using thebundle name. Bundle names at the two ends of a bundle can be different. Bundle names must beunique on the same device.The bundle names at both ends are used during the bundle link negotiation phase. After changingthe bundle name of an MFR interface, you must execute theshutdown and undo shutdowncommands on the interface to make the new bundle name take effect.Examples# Set the bundle name to bundle1 for interface MFR 0/0/2. system-view[Sysname] interface mfr 0/0/2[Sysname-MFR0/0/2] mfr bundle-name bundle1Related commandsdisplay mfr
