220If you have specified the PVC name when creating the PVC, you can enter the PVC view byusingthe pvc pvc-name [ vpi/vci ] command, and del ete the PVC by using theundo pvc pvc-name [vpi/vci ] or undo pvc vpi/vci command.You can configure only one PVC on an ATM P2P subinterface.You can create a maximum of eight PVCs in a PVC-group.You cannot delete a PVC from a PVC-group in ATM interface view or ATM subinterface view.Examples# Create a PVC named aa on the interface ATM 2/4/0, and set its VPI/VCI value to 1/101. system-view[Sysname] interface atm 2/4/0[Sysname-ATM2/4/0] pvc aa 1/101[Sysname-ATM2/4/0-pvc-aa-1/101]# Create a PVC named bb for PVC-group 1, and set its VPI/VCI value to 1/102. system-view[Sysname] interface atm 2/4/0[Sysname-ATM2/4/0] pvc-group 1[Sysname-ATM2/4/0-pvc-group-1] pvc bb 1/102[Sysname-ATM2/4/0-pvc-group-1-pvc-bb-1/102]Related commandsdisplay atm pvc-infopvc-grouppvc-groupUse pvc-group to create a PVC-group and enter its view, or enter the view of an ex istingPVC-group.Use undo pvc-group to delete the specified PVC-group.Syntaxpvc-group group-numberundo pvc-group group-numberDefaultNo PVC-groups exist.ViewsATM interface viewATM subinterface viewPredefined user rolesnetwork-adminParametersgroup-number: Specifies a PVC-group by its number in the range of 1 to 128.Usage guidelinesA PVC-group can share traffic load among PVCs in it by transmitting IP packets of different prioritiesthrough different PVCs.
