68display pppoe-server session summaryUse display pppoe-server session summary to display summary PPPoE session information.SyntaxCentralized devices in standalone mode:display pppoe-server session summary [ interface interface-type interface-number ]Distributed devices in standalone mode:display pppoe-server session summary { slot slot-number| interface interface-type interface-number }ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersinterface interface-type interface-number: Specifies an interface by its type and number. If you donot specify an interface for centralized devices in standalone mode, the command displays summaryPPPoE session information for all interfaces.slot slot-number: Specifies a card by its slot number. If you do not specify a card, the commanddisplays summary PPPoE session information for all cards. (Distributed devices in standalonemode.)Usage guidelinesSummary PPPoE session information on a phy sical interface can be di splayed only on the cardwhere the interface resides. Summary PPPoE session information on a logical interfacecan bedisplayed on all cards.Examples# Display summary PPPoE session information on GigabitEthernet 1/0/1. display pppoe-server session summary interface gigabitethernet 1/0/1Total PPPoE sessions: 2Ethernet interface: GE1/0/1 Session ID: 1PPP interface: VA1 State: PADR_RCVDRemote MAC: 00e0-1500-7100 Local MAC: 00e0-1400-7300Service VLAN: N/A Customer VLAN: N/AEthernet interface: GE1/0/1 Session ID: 2PPP interface: VA2 State: OPENRemote MAC:00e0-1600-7200 Local MAC: 00e0-1400-7400Service VLAN: 2 Customer VLAN: 155# (Centralized devices in standalone mode.)Display summary PPPoE session information on al linterfaces. display pppoe-server session summaryTotal PPPoE sessions: 2Local PPPoE sessions: 1
