H3C MSR810 Command Reference Manual

Also see for MSR2600-10-X1: Command reference Command reference Installation guide Quick start guide

Contents

H3C MSR810 Command Reference Manual Manual pdf 353 page image

341Examples# Set the InARP request interval during an InARP learning process to 15 seconds on the FrameRelay interface Serial 2/1/0. system-view[Sysname] interface serial 2/1/0[Sysname-Serial2/1/0] fr inarp interval 15Related commandsdisplay fr inarpfr inarpfr interface-typeUse fr interface-type to set the type of a Frame Relay interface.Use undo fr interface-type to restore the default.Syntaxfr interface-type { dce | dte }undo fr interface-typeDefaultThe type of a Frame Relay interface is DTE.ViewsInterface viewPredefined user rolesnetwork-adminParametersdce: Specifies DCE.dte: Specifies DTE.Examples# Set the type of the Frame Relay interface Serial 2/1/0 to DCE. system-view[Sysname] interface serial 2/1/0[Sysname-Serial2/1/0] fr interface-type dcefr ipv6 indUse fr ipv6 ind to enable IND for dynamic address mapping on a Frame Relay interface.Use undo fr ipv6 ind to disable IND for dynamic address mapping on a Frame Relay interface.Syntaxfr ipv6 ind [ dlci-number ]undo fr ipv6 ind [ dlci-number ]DefaultIND is disabled on a Frame Relay interface.