329fr lmi n392dcefr lmi n392dtefr lmi n393dcefr lmi n393dtefr lmi t392dcefr lmi typetimer-holddisplay fr mapUse display fr map to display Frame Relay address mapping.Syntaxdisplay fr map [ interface interface-type interface-number ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersinterface interface-type interface-number: Specifies an interface by its type and number. It can be amain or subinterface. If you specify a main interface, this command displays information for the maininterface and its subinterfaces. If you specify a subinterface, this command displays information forthe subinterface. If you do not specify an i nterface, this command displays information for allinterfaces.Usage guidelinesBased on the output from this command, you can determine whether the static address-to-DLCImaps are correct and whether dynamic address mapping is operating correctly.Examples# Display Frame Relay address mapping for all interfaces. display fr mapMap information for interface Serial2/1/0 (DTE)DLCI: 100, IP InARP 100.100.1.1, Serial2/1/0Creation time: 2012/10/21 14:48:44, Status: ActiveDLCI: 200, IP InARP 100.100.1.1, Serial2/1/0Creation time: 2012/10/21 14:34:42, Status: ActiveDLCI: 300, IP 1.1.1.1, Serial2/1/0Creation time: 2012/10/21 15:03:35, Status: ActiveTable 65 Command outputField DescriptionMap information for interface Serial2/1/0 (DTE) Frame Relay address mapping for DTE interfaceSerial 2/1/0.
