232Modem encoding format varies by countries. Use this command to set the modem encoding formatfor a country.Examples# Set the country code to china on AM interface 2/4/0. system-view[Sysname] interface analogmodem 2/4/0[Sysname-Analogmodem2/4/0] country-code chinamodem answer-timerUse modem answer-timer to set a dial-up connection timer.Use undo modem answer-timer to restore the default.Syntaxmodem answer-timer timeundo modem answer-timerDefaultThe dial-up connection timer is 60 seconds.ViewsUser line viewPredefined user rolesnetwork-adminParameterstime: Sets the dial-up connection timer in the range of 1 to 65535, in seconds.Usage guidelinesWhen the timer expires, the modem disconnects the call.• If the modem is on the calling party side, the timer starts when the modem starts to dial.• If the modem is on the called party side, the timer starts when the modem goes off hook.This command is available on the following user lines:• TTY lines for the following interfaces: AM interface Asynchronous serial interface Asynchronous/synchronous serial interface operating in asynchronous mode• AUX lineThis command is not available on the console or VTY lines.To display the user line for an interface, use the display line command.Examples# Set the dial-up connection timer to 50 seconds. system-view[Sysname] line aux 0[Sysname-line-aux0] modem answer-timer 50
