45Examples# Display MP information. (MP is configured through an MP-group interface.) display ppp mpTemplate: MP-group2/0/0max-bind: 20, fragment: enabled, min-fragment: 128Master link: MP-group2/0/0, Active members: 2, Bundle MultilinkPeer's endPoint descriptor: MP-group2/0/0Sequence format: short (rcv)/long (sent)Bundle Up Time: 2012/11/05 07:29:33:6120 lost fragments, 0 reordered, 0 unassigned, 0 interleavedSequence: 0 (rcv)/0 (sent)Active member channels: 2 membersSerial2/1/0:15 Up-Time: 2012/11/05 07:29:33:613Serial2/1/0:16 Up-Time: 2012/11/05 07:30:10:945Inactive member channels: 2 membersSerial2/1/0:17Serial2/1/0:18Table 9 Command outputField Descriptionmax-bind Maximum number of links that can be bound.fragment Indicates whether MP fragmentation is enabled or disabled.min-fragment Minimum size of an MP fragment.Sequence format: short (rcv)/long (sent)Sequence number header format of MP. The short sequencenumber format is used in the incoming direction, and the longsequence number format is used in the outgoing direction.reordered Number of reassembled packets.unassigned Number of packets waiting for being reassembled.interleavedNumber of interleaved fragments.LFI breaks larger packets into fragments and interleaves thefragments between smaller packets for transmission.Sequence: 0 (rcv)/0 (sent) Received sequence number/sent sequence number.Up-Time Uptime of a member channel.interface mp-groupUse interface mp-group to create an MP-group interface and enter its view, or enter the view of anexisting MP-group interface.Use undo interface mp-group to remove an MP-group interface.Syntaxinterface mp-group mp-numberundo interface mp-group mp-numberDefaultNo MP-group interfaces exists.
