368mfr link-nameUse mfr link-name to set the bundle link name for a Frame Relay interface.Use undo mfr link-name to restore the default.Syntaxmfr link-name nameundo mfr link-nameDefaultThe bundle link name is the name of the physical interface, for example, Serial 2/1/0.ViewsFrame Relay interface viewPredefined user rolesnetwork-adminParametersname: Specifies the bundle link name, a case-sensitive string of 1 to 49 characters.Usage guidelinesUse link-protocol mfr to enable MFR encapsulation on a Frame Relay interface before configuringthe mfr link-name command on the interface.The bundle link name identifies the bundle link to the peer device and enables the local device todetermine which bundle links are bound to which bundles. The bundle link names in a bundle mustbe unique on the same device. The local and peer bundle link names can be different.The local and peer bundle link names are used during the bundle link negotiation phase. Afterchanging the bundle link name on an interface, you must execute theshutdown and undoshutdown commands on the interface to make the new bundle link name take effect.Examples# Set the bundle link name to bl1 for interface Serial 2/1/0. system-view[Sysname] interface serial 2/1/0[Sysname-Serial2/1/0] link-protocol mfr[Sysname-Serial2/1/0] mfr link-name bl1Related commandslink-protocol mfrmfr retryUse mfr retry to set the maximum number of times that a bundle link can resend a hello messagewhen waiting for a hello acknowledgement.Use undo mfr retry to restore the default.Syntaxmfr retry retriesundo mfr retry
