2-12 MIB Style ConfigurationH3C private MIB involves two styles, H3C compatible MIB and H3C new MIB. In the H3C compatibleMIB style, the device sysOID is under the H3C’s enterprise ID 25506, and the private MIB is under theenterprise ID 2011. In the H3C new MIB style, both the device sysOID and the private MIB are under theH3C’s enterprise ID 25506. These two styles of MIBs implement the same management function exceptfor their root nodes. A device is shipped with MIB loaded and the MIB style may vary depending on thedevice. To implement NMS’s flexible management of the device, the device allows you to configure MIBstyle, that is, you can switch between the two styles of MIBs. However, you need to ensure that the MIBstyle of the device is the same as that of the NMS.Setting the MIB StyleFollow these steps to set the MIB style:To do… Use the command… RemarksEnter system view system-view —Set the MIB style of the device mib-style [ new | compatible ] Optionalnew by defaultThe modified MIB style takes effect only after you reboot the device. Therefore, you are recommendedto reboot the device after setting the MIB style to ensure that the modification of the MIB style takeseffect.Displaying and Maintaining MIBTo do… Use the command… RemarksDisplay the MIB style display mib-style Available in any view
