1-25[SwitchA-nqa-admin-test] type dhcp[SwitchA-nqa-admin-test-dhcp] operation interface vlan-interface 2[SwitchA-nqa-admin-test-dhcp] quit# Enable DHCP test.[SwitchA] nqa schedule admin test start-time now lifetime forever# Disable DHCP test after the test begins for a period of time.[SwitchA] undo nqa schedule admin test# Display the result of the last DHCP test.[SwitchA] display nqa result admin testNQA entry(admin admin, tag test) test results:Send operation times: 1 Receive response times: 1Min/Max/Average round trip time: 624/624/624Square-Sum of round trip time: 389376Last succeeded probe time: 2007-11-22 09:56:03.2Extended results:Packet lost in test: 0%Failures due to timeout: 0Failures due to disconnect: 0Failures due to no connection: 0Failures due to sequence error: 0Failures due to internal error: 0Failures due to other errors: 0Packet(s) arrived late: 0# Display the history of DHCP tests.[SwitchA] display nqa history admin testNQA entry(admin admin, tag test) history record(s):Index Response Status Time1 624 Succeeded 2007-11-22 09:56:03.2FTP Test Configuration ExampleNetwork requirementsUse the NQA FTP function to test the connection with a specified FTP server and the time necessary forDevice A to upload a file to the FTP server. The login username is admin, the login password issystemtest, and the file to be transferred to the FTP server is config.txt.Figure 1-5 Network diagram for FTP testsConfiguration procedure# Create an FTP test group and configure related test parameters. system-view
