2-4To do… Use the command… RemarksEnter system view system-view —Configure the port number of theHTTPS service ip https port port-numberOptionalBy default, the port number of theHTTPS service is 443.If you execute the ip https port command for multiple times, the last configured port number is used.Associating the HTTPS Service with an ACLAssociating the HTTPS service with an ACL can filter out requests from some clients to let pass onlyclients that pass the ACL filtering.Follow these steps to associate the HTTPS service with an ACL:To do… Use the command… RemarksEnter system view system-view —Associate the HTTPS service withan ACL ip https acl acl-number RequiredNot associated by default.z If you execute the ip https acl command for multiple times to associate the HTTPS service withdifferent ACLs, the HTTPS service is only associated with the last specified ACL.z For the detailed introduction to ACL, refer to ACL Configuration in the Security Volume.Displaying and Maintaining HTTPSTo do… Use the command… RemarksDisplay information aboutHTTPS display ip https Available in any viewHTTPS Configuration ExampleNetwork requirementsUsers can access and control the device through logging in to the Web page. To prevent unauthorizedusers from accessing and controlling the device and enhance the device management security, thedevice requires the users log in to the Web page through HTTPS and authenticates the users using SSL,and ensures that the transmitted data will not be spoofed and tampered.To meet the requirements, the following configurations need to be performed:
