1-30You can specify up to eight security policy servers for a RADIUS scheme.Enabling the Listening Port of the RADIUS ClientFollow these steps to enable the listening port of the RADIUS client:To do… Use the command… RemarksEnter system view system-view —Enable the listening port of the RADIUSclient radius client enable OptionalEnabled by defaultDisplaying and Maintaining RADIUSTo do… Use the command… RemarksDisplay the configurationinformation of a specifiedRADIUS scheme or all RADIUSschemesdisplay radius scheme[ radius-scheme-name ] [ slotslot-number ]Available in any viewDisplay statistics about RADIUSpacketsdisplay radius statistics [ slotslot-number ] Available in any viewDisplay information aboutbuffered stop-accountingrequests that get no responsesdisplay stop-accounting-buffer{ radius-schemeradius-server-name | session-idsession-id | time-range start-timestop-time | user-name user-name }[ slot slot-number ]Available in any viewClear RADIUS statistics reset radius statistics [ slotslot-number ] Available in user viewClear buffered stop-accountingrequests that get no responsesreset stop-accounting-buffer{ radius-schemeradius-server-name | session-idsession-id | time-range start-timestop-time | user-name user-name }[ slot slot-number ]Available in user viewConfiguring HWTACACSDifferent from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses ofthe HWTACACS servers, you can make any changes to HWTACACS parameters, whether there areusers online or not.
