1-38[Switch-radius-rd] primary accounting 10.1.1.1 1813[Switch-radius-rd] key accounting expert[Switch-radius-rd] server-type extended[Switch-radius-rd] user-name-format without-domain[Switch-radius-rd] quit# Create a local user named hello.[Switch] local-user hello[Switch-luser-hello] service-type telnet[Switch-luser-hello] password simple hello[Switch-luser-hello] quit# Configure the AAA methods for the ISP domain.[Switch] domain bbb[Switch-isp-bbb] authentication login local[Switch-isp-bbb] authorization login hwtacacs-scheme hwtac[Switch-isp-bbb] accounting login radius-scheme rd[Switch-isp-bbb] quit# Configure the default AAA methods for all types of users.[Switch] domain bbb[Switch-isp-bbb] authentication default local[Switch-isp-bbb] authorization default hwtacacs-scheme hwtac[Switch-isp-bbb] accounting default radius-scheme imcWhen telneting into the switch, a user enters username telnet@bbb for authentication using domainbbb.AAA for SSH Users by a RADIUS ServerNetwork requirementsAs shown in Figure 1-9, configure the switch to use the RADIUS server to provide authentication,authorization, and accounting services to SSH users.z Configure an iMC server to act as the RADIUS server to provide authentication, authorization, andaccounting services for SSH users. The IP address of the RADIUS server is 10.1.1.1/24.z Set both the shared keys for authentication and accounting packets exchanged with the RADIUSserver to expert; and specify that a username sent to the RADIUS server carries the domain name.The RADIUS server provides different user services according to the domain names.Figure 1-9 Configure AAA for SSH users by a RADIUS serverInternetSwitchSSH userRADIUS server10.1.1.1/24Vlan-int2192.168.1.70/24Configuration procedure1) Configure the RADIUS server. (iMC)
