1-19To do… Use the command… RemarksCreate a Track object andassociate it with thespecified collaborationobject of the NQA test grouptrack entry-number nqa entryadmin-name operation-tag reactionitem-numRequiredNot created by default.z You cannot modify the content of a reaction entry using the reaction command after thecollaboration object is created.z The collaboration function is not supported in a UDP jitter or voice test.Configuring Trap DeliveryTraps can be sent to the network management server when test is completed, test fails or probe fails.Configuration prerequisitesBefore configuring trap delivery, you need to configure the destination address of the trap message withthe snmp-agent target-host command, create an NQA test group, and configure related parameters.For the introduction to the snmp-agent target-host command, see SNMP Commands in the SystemVolume.Configuring trap deliveryFollow these steps to configure trap delivery:To do… Use the command… RemarksEnter system view system-view —Enter NQA test group view nqa entry admin-nameoperation-tag —Enter test type view of the testgrouptype { dhcp | dlsw | ftp | http |icmp-echo | snmp | tcp |udp-echo | udp-jitter | voice }—Configure to send traps tonetwork management serverunder specified conditionsreaction trap { probe-failureconsecutive-probe-failures |test-complete | test-failurecumulate-probe-failures }OptionalNo traps are sent to thenetwork management server bydefault.Only the reaction trap test-complete command is supported in a voice test, namely, in a voice test,traps are sent to the NMS only if the test succeeds.
