IBM x3690 X5 Service Manual

Also see for System x3690 X5: Implementation guide Installation and user guide At-a-glance reference guide At-a-glance guide Manual

Table 10. System x3690 X5 IMM error messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.v See Chapter 4, “Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192,” on page 249 to determine which componentsare customer replaceable units (CRU) and which components are field replaceable units (FRU).v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained servicetechnician.Event ID Message Severity Description ActionIP subnet mask of network interfacemodified from %1 to %2 by user%3s.(%1 =CIM_IPProtocolEndpoint.SubnetMask;%2 = CIM_StaticIPAssignmentSettingData.SubnetMask; %3 = user ID)Info A user hasmodified the IPsubnet mask of theIMM.No action; information only.IP address of default gatewaymodified from %1 to %2 by user%3s.(%1 =CIM_IPProtocolEndpoint.GatewayIPv4Address; %2 =CIM_StaticIPAssignmentSettingData.DefaultGatewayAddress; %3 = user ID)Info A user hasmodified thedefault gateway IPaddress of theIMM.No action; information only.OS Watchdog response %1 by %2.(%1= Enabled or Disabled; %2 = user ID)Info A user has enabledor disabled an OSWatchdog.No action; information only.4000000d-00000000 DHCP[%1] failure, no IP addressassigned.(%1 = IP address,xxx.xxx.xxx.xxx)Info A DHCP server hasfailed to assign anIP address to theIMM.1. Make sure that thenetwork cable isconnected.2. Make sure that there isa DHCP server on thenetwork that can assignan IP address to theIMM.Remote Login Successful. Login ID:%1 from %2 at IP address %3.(%1 =user ID; %2 =ValueMap(CIM_ProtocolEndpoint.ProtocolIFType; %3 = IP address,xxx.xxx.xxx.xxx)Info A user hassuccessfully loggedin to the IMM.No action; information only.Attempting to %1 server %2 by user%3.(%1 = Power Up, Power Down,Power Cycle, or Reset; %2 =IBM_ComputerSystem.ElementName;%3 = user ID)Info A user has used theIMM to perform apower function onthe server.No action; information only.40000010-00000000 Security: Userid: ' had %2 loginfailures from WEB client at IP address%3.(%1 = user ID; %2 =MaximumSuccessiveLoginFailures(currently set to 5 in the firmware);%3 = IP address, xxx.xxx.xxx.xxx)Error A user hasexceeded themaximum numberof unsuccessfullogin attempts froma Web browser andhas been preventedfrom logging in forthe lockout period.1. Make sure that thecorrect login ID andpassword are beingused.2. Have the systemadministrator reset thelogin ID or password.40000011-00000000 Security: Login ID: ' had %2 loginfailures from CLI at %3.(%1 = user ID;%2 =MaximumSuccessiveLoginFailures(currently set to 5 in the firmware);%3 = IP address, xxx.xxx.xxx.xxx)Error A user hasexceeded themaximum numberof unsuccessfullogin attempts fromthe command-lineinterface and hasbeen preventedfrom logging in forthe lockout period.1. Make sure that thecorrect login ID andpassword are beingused.2. Have the systemadministrator reset thelogin ID or password.Chapter 3. Diagnostics 215