DTMF tone sequences are used for autopatching, controllingother equipment, etc. The transceiver has 16 DTMF memorychannels (d0–d#) for storage of often-used DTMF tone se-quences of up to 24 digits.qPush and hold [TONE•DTMF] for 1 sec.wRotate [DIAL] to select the “DTMF MEMORY,” then push[MAIN•BAND].eRotate [DIAL] to select the desired memory channel, thenpush [MAIN•BAND].• A total of 16 channels, “d0” to “d#” are available.r Rotate the [DIAL] to select the desired code.t Push [>](M/CALL•MW) (Left band’s) to select the next digit.• Pushing [<](V/MHz•SCAN) (Left band’s) moves the cursor back-ward.yRepeat the steps r and t to set the desired DTMF tonesequence, then push [MAIN•BAND].uPush [BACK](V/MHz•SCAN) (Right band’s) twice to exitfrom DTMF memory screen.[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “d4.”PushRotatePush and hold for 1 sec.TONEDTMF Rotate PushPush (Right band’s) twice to back.Rotate then push (Left band’s)M/CALLMWV/MHzSCAN> BACKRepeat the previous step until thedesired tone sequence is entered.MAINBAN DMAINBANDMAINBANDMAINBANDMAINB ANDPushMAINBAND81DTMF MEMORY ENCODER10■ Programming a DTMF tone sequence
