696 MEMORY MODE OPERATION■ Memory clearingContents of programmed memories can be cleared (blanked),if desired.qPush [V/MHz•SCAN] to select VFO mode in the desiredband (left or right) .wPush and hold the same band’s [M/CALL•MW] for 1 sec.• “X” indicator and the memory channel number blink.eRotate [DIAL] to select the memory channel to be cleared.r Push and hold [CLR](DUP•MONI) for 1 sec. to clear.• 3 beeps sound, then the frequency is cleared.• “X” indicator and the channel number blink continuously.• When clearing the call channel, the current VFO conditions arere-programmed into the call channel automatically.tPush [BACK](V/MHz•SCAN) (Right band’s) to return to VFOmode.NOTE: Be careful!— the contents of cleared memoriesCANNOT be recalled.[EXAMPLE]: Clearing memory channel 20.Push (Main band’s) to select VFO. Rotate (Main band’s) for selectingmemory channel to be cleared.Push and hold (Main band’s) for 1 sec.Push .V/MHzSCANV/MHzSCANM/CALLMWPush and hold for 1 sec. memory clearing.DUPMONIBeepBeepBeep“““““CLR BACKMAINBAND
