585DV MODE OPERATION (Optional UT-123 is required)12345678910111213141516171819DD Transmission condition settingq Push [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to display the“MENU” screen.eRotate [DIAL] to select “DV SET MODE,” then push[MAIN•BAND].rRotate [DIAL] to select “DV DATA TX,” then push[MAIN•BAND].t Rotate [DIAL] to select the desired transmission condition.PTT : The entered text data in the Terminal Window(buffer screen) is transmitted when [PTT] ispushed. (default)AUTO : The entered text data in the Terminal Window(buffer screen) is automatically transmitted whentext is entered.yPush [BACK](V/MHz•SCAN) (Right band’s) three times toexit from DV set mode screen.■ DV voice memoryThe IC-E2820 has a DV voice memory that records a total of30 sec. (approx.) of received audio.The DV voice memory is divided into 2 tracks, 15 secondseach in a track, as the default setting.DD Recording received audioqSelect DV mode in main band, and deactivate the prioritywatch (p. 80) if activated.wWhile receiving a DV signal, push [F• ] twice to displaythe function guide 2.ePush [REC](M/CALL•MW) (Right band’s) to display theREC track screen.r Rotate [DIAL] to select the desired track.• Bar meter is displayed for the track that has been recorded.t Push [REC](M/CALL•MW) (Right band’s) to start recording.• Track counter (bar meter) is displayed during record.• The recording is paused automatically when the DV signal is in-terrupted or when the DV audio signal cannot be received cor-rectly. Re-starts the recording when the DV audio signal isreceived correctly.y Push [■](TONE•DTMF) to stop recording.• The recording stops automatically when the track becomes full.
