555 DV MODE OPERATION (Optional UT-123 is required)■ Automatic reply functionThe automatic reply function replies to calls by a station thatspecified your call sign.Two methods of replying are available: one is making a replycall with your own call sign, and other one is making a replycall with reply voice audio that has been recorded in DV voicememory.DD Automatic reply function settingq Push [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to display the“MENU” screen.eRotate [DIAL] to select “DV SET MODE,” then push[MAIN•BAND].rRotate [DIAL] to select “AUTO REPLY,” then push[MAIN•BAND].t Rotate [DIAL] to select the desired reply condition.OFF : Deactivate the automatic reply function. (default)ON : Reply to the call with your own call sign.VOICE : Reply to the call with the recorded voice memory.yPush [BACK](V/MHz•SCAN) (Right band’s) three times toreturn to frequency indication.DD Voice memory recording for automatic replyq Push [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to display the“MENU” screen.eRotate [DIAL] to select “DV VOICE MEMO,” then push[MAIN•BAND].rRotate [DIAL] to select “REPLY VOICE,” then push[MAIN•BAND].• Bar meter is displayed when the reply voice has already beenrecorded.tWhile pushing and holding [PTT], speak into the micro-phone.• Up to 10 seconds of message is recordable.• The recording stops after 10 second or when [PTT] is released.yPush [BACK](V/MHz•SCAN) (Right band’s) three times toexit from DV VOICE MEMO screen.IMPORTANT!Set the transceiver for single band operation and/or set mini-mum [VOL] level for sub-band when recording the reply voice.Otherwise received audio or unwanted noise from sub-band is also recorded into the voice memory.
