8611TONE SQUELCH AND POCKET BEEP12345678910111213141516171819D Reverse tone/DTCS squelchThe reverse tone/DTCS squelch is convenient if you want toignore a specific signal.qSet the desired operating frequency and the desired oper-ating mode.wPush [TONE•DTMF] several times to select “T SQL-R” or“DTCS-R” appears.eWhen a signal with unmatched tone or code is received,the transceiver’s mute is released and the received audiosounds.The transceiver mutes the squelch when a signal with thematched tone or code is received.D Setting tone squelch frequencyq Push [F• ] to display the function guide.w Push [MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.e Rotate [DIAL] to select “DUP/TONE…” then push[MAIN•BAND].r Rotate [DIAL] to select “CTCSS TONE” then push[MAIN•BAND].t Rotate [DIAL] to select the desired CTCSS tone frequencythen push [MAIN•BAND].• Each operating band and each memory channel have indepen-dent settings.• See the table on page 87 for available tone frequencies.y Push [BACK](V/MHz•SCAN) (Right band’s) to exit fromDUP/TONE set mode.z Push [SET B(D-OFF)] to enter set mode.x Push [Y]/[Z] several times to select“DUP/TONE…” then push [SET B(D-OFF)].c Push [Y]/[Z] several times to select “CTCSSTONE” then push [SET B(D-OFF)].v Push [Y]/[Z] to select the desired tone fre-quency then push [ SET B(D-OFF)].b Push [CLR A(MW)] to exit DUP/TONE set mode.SETBTone squelch reverse DTCS reverse
