9011TONE SQUELCH AND POCKET BEEP12345678910111213141516171819■ Digital call sign/digital code squelch The optional UT-123q Set the desired operating frequency in DV mode, Digitalcode and MY CALL SIGN.w Push [TONE•DTMF] several times to activate the digitalcode or digital call sign squelch. (DSQL or CSQL)• Digital call sign squelch “DSQL,” Digital call sign beep “DSQL ,”Digital code squelch “CSQL,” Digital code beep “CSQL ” andno tone operation are activated in order.e Operate the transceiver in the normal way.r When the received signal includes a matching callsign/code, the squelch opens and the signal can be heard.• When the received signal’s call sign/code does not match, digitalcall sign/digital code squelch does not open; however, the S/RFindicator shows signal strength.DD YOUR and MY call signs settingSee page 38 for DV MODE OPERATION.DD Digital code settingq Push [F• ] to display the function guide, then push[MODE](V/MHz•SCAN) (Left band’s) several times to selectDV mode.w Push [MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.e Rotate [DIAL] to select “DV SET MODE” then push[MAIN•BAND].r Rotate [DIAL] to select “DIGITAL CODE” then push[MAIN•BAND].t Rotate [DIAL] to select the desired digital code (00–99)then push [MAIN•BAND].• Each operating band and each memory channel have indepen-dent settings.y Push [BACK](V/MHz•SCAN) (Right band’s) twice to returnto frequency indication.Digital call sign pocket beep Digital code pocket beepDigital call sign squelch Digital code squelchNOTE: Use digital code squelch when operating with two ormore stations. Because the digital call sign squelch functionrecognizes “MY CALL SIGN,” the digital call sign squelchfunction can be used when operating with only one station.
