71 PANEL DESCRIPTION■ Function guide indicationsThe function guide indicators allow you to simply using a widevariety of functions.D Function guideq MODE KEY [MODE](V/MHz•SCAN) (p. 21)Push to select an operating mode from FM, FM-N, AM,AM-N and DV* in main band.*Available only when the optional UT-123 is installed.w TUNING STEP KEY [TS](M/CALL•MW) (p. 18)Push to display the tuning step selection mode.• 5.0,* 6.25,* 10, 12.5, 15,* 20, 25, 30 and 50 kHz steps are avail-able. *Not selectable in 900 MHz band.e BAND SCOPE KEY [SCP](DUP•MONI) (p. 28)➥ Push to display the simple band scope and make a sin-gle sweep of the band.➥ Push and hold for 1 sec. to display the simple bandscope and sweep continuously.• Push [SCP](DUP•MONI) momentarily to cancel the sweep.r SCAN SKIP KEY [SKIP](TONE•DTMF) (p. 78)In memory mode, push to select the scan skip conditionfor the selected memory channel.• “≈” appears when memory skip, “P≈” appears when programskip selection.tMEMORY NAME INDICATION KEY [M.N](LOW•PRIO)(p. 67)Push to select the memory name indication.• Memory name, frequency and OFF selections are available.y SINGLE WATCH KEY [SNGL](M/CALL•MW) (p. 25)Push to select the single band operation mode.• Push [DUAL](M/CALL•MW)(for right band) to select the dual-watch mode.u MENU MODE KEY [MENU](V/MHz•SCAN) (p. 96)Push to select the MENU screen indication.q w e r t y u
