435 DV MODE OPERATION (Optional UT-123 is required)DD Repeater operation in the same zoneqSet the desired repeater’s frequency, offset and shift direc-tion in the main band. (pgs. 30, 31)• Select DV mode in advance. (p. 21)w Set your own call sign. (p. 38)• See p. 36 for your own call sign programming.e Set the desired station call sign. (p. 39)• See p. 38 for station call sign programming.r Set the repeater’s call sign as follows;z Push [F• ] twice to display the function guide 2.xPush [CS](V/MHz) (Left band’s) to display the “CALLSIGN” screen.cRotate [DIAL] to select “RPT1,” then push[MAIN•BAND].• RPT1 CALL SIGN screen is displayed.vRotate [DIAL] to select the nearest repeater’s call signthen push [BACK](V/MHz) (Right band’s) .bRotate [DIAL] to select “RPT2” then push[MAIN•BAND].• RPT2 CALL SIGN screen is displayed.nRotate [DIAL] to select the desired repeater’s (in thesame zone) call sign.• Select “NOT USE✱” when not operating RPT2.mPush [BACK](V/MHz•SCAN) (Right band’s) to exit “CALLSIGN” screen.t Push [PTT] to transmit; release to receive.
