10313 MENU SCREEN OPERATION■ SCAN itemsDD Scan timerSelects scan resume timer from T-15 (default) , T-10, T-5 andP-2.• T-15/10/5 : Scan pauses for 15/10/5 sec., then resumes.• P-2 : Pause on a signal until signal disappears,then resumes 2 sec. after the signal disap-pears.DD Program skip scanSets programmed skip scan setting from ON (default) andOFF for full scan or programmed scan operation.DD Bank link scanSets the memory bank link function ON and OFF (default). Thelink function provides continuous bank scan, scanning all con-tents in the selected banks during bank scan.• Bank link settingq Enter MENU screen via function guide.➥ Push [F• ] to display function guide.➥ Push [MENU](V/MHz•SCAN) (Right band’s) to enterMENU screen.w Rotate [DIAL] to select “SCAN,” then push [MAIN•BAND].e Rotate [DIAL] to select “BANK LINK,” then push[MAIN•BAND] to enter bank setting.r Rotate [DIAL] to select the desired bank initial, then push[MAIN•BAND].t Rotate [DIAL] to turn ON (default) and OFF the link setting,then push [MAIN•BAND].y Rotate [DIAL] to select next bank and repeat steps r tot, or push [BACK](V/MHz•SCAN) (Right band’s) threetimes to exit scan set mode.
