11614OTHER FUNCTIONS12345678910111213141516171819D Cloning using a personal computerData can be cloned to and from a personal computer (Mi-crosoft® Windows® 98SE/2000/Me/XP) using the optional CS-2820 CLONING SOFTWARE and the optional datacommunication cable; OPC-1529R or cloning cable; OPC-478/478U. Consult the CS-2820 CLONING SOFTWARE HELP filefor details.D Cloning errorNOTE: DO NOT push any key on the transceiver (to becloned) during cloning. This will cause a cloning error.When the display appears as below, a cloning error has oc-curred.If this happens, turn the transceiver (to be cloned) power OFFthen ON again and cloning must be repeated.■ Auto power OFFThe transceiver can be set to automatically turn OFF after aspecified period with a beep when no switch is pushed.120 min., 90 min., 60 min., 30 min. and OFF can be speci-fied. The specified period is retained even when the trans-ceiver is turned OFF by the auto power-off function. To cancelthe function, select “OFF” in the auto power-off item in setmode.This can be selected with “AUTO POWER OFF” in set mode.(p. 109)■ Time-out timerTo prevent accidental prolonged transmission, etc., the trans-ceiver has a time-out timer. This timer cuts a transmissionOFF after 3, 5, 15 or 30 min. of continuous transmission. Thistimer can be cancelled (default).Approx. 10 sec. before the time-out timer is activated, thetransceiver emits a beep tone as a warning.This can be selected with “TIME-OUT TIMER” in set mode.(p. 109)
