Icom IC-V82 Instruction Manual

Also see for IC-U82: Instruction manual Addendum Specifications Service manual Instruction manual

Contents

IIIQUICK REFERENCE GUIDE■ Your first contactNow that you have your IC-V82/U82 ready, you are exited toget on the air. We would like to walk you through a few basicoperational steps to make your first “On The Air” use an en-joyable experience.D About default settingThe [VOL] control function can be traded with [YY]/[ZZ] keys func-tion in INITIAL SET MODE. However, in this QUICK REFERENCE,the factory default setting ([VOL] controls audio output level) isused for simple instructions.D Basic operation1. Turning ON the transceiverAlthough you have purchased a brand new transceiver, somesettings may be changed from the factory defaults becauseof the QC process. Resetting the CPU is necessary to startfrom factory default.➥ While pushing [MONI] and[D• CLR ], push [PWR] for 1 sec. toreset the CPU and turn power ON.2. Adjusting audio output level➥ Rotate [VOL] to set the desiredaudio level.3. Adjusting the squelch level➥ While pushing and holding[MONI], push [YY] or [ZZ] to set thesquelch level.4. Tune the desired frequencyThe up/down keys, [YY]/[ZZ], willallow you to tune the frequency thatyou want to operate on. Page 14 willinstruct you on how to adjust the tun-ing step.➥ Push [YY] or [ZZ] to adjust the fre-quency.PWRMONICLRDMONI[VOL]