Icom IC-V82 Instruction Manual

Also see for IC-U82: Instruction manual Addendum Specifications Service manual Instruction manual

Contents

4611 DIGITAL MODE OPERATION■ EMR communicationThe EMR communication mode is available for Digital modeoperation. In the EMR call, no call sign setting is necessary.q Set the desired frequency then push [A•FUNC] and [0•OPT]to enter OPTION SET MODE.w Push [YY] or [ZZ] several times to select the EMR setting,then turns the EMR setting ON.• “EmR” appears.eOperate the transceiver normal way.rTo cancel the EMR communication mode, push [A• FUNC ]and [0• OPT] for 1 sec., then rotate [VOL] to turn OFF.■ Pocket beep operationThis function uses a digital code/call sign for calling and canbe used as a “common pager” to inform you that someonehas called while you were away from the transceiver. The dig-ital code or call sign squelch does not function while in a low-speed data communication.DD Waiting for a call from a specific stationq Set the operating frequency.w Program the digital code or call sign in setting mode.• See p. 51, “Digital code setting” or p. 40 “Call sign program-ming.”e Push [A• FUNC ] and [1• TONE ] one or more times until “ ”or “ ” appears in the function display.• “ ” for call sign squelch; “ ” for digital code squelch operation.r Push [A•FUNC], then push [2•P.BEEP] to activate the pocketbeep function.• “ ” appears.t When a signal with the matched call sign/digital code is re-ceived, the transceiver emits beep tones and blinks “ .”• Beep tones sound for 30 sec. and “ ” blinks. To stop the beeps man-ually, push any key. “ ” continues blinking until step y is operated.y Push [PTT] to answer.• “ ” disappears and cancels the pocket beep function automati-cally.u To cancel the call sign/digital code squelch, push [A•FUNC]and [1• TONE] one or more times until or “ ” or “ ” disap-pears.