5511DIGITAL MODE OPERATION11■ GPS operationThe IC-V82/U82 can indicate the current position (Latitude andLongitude) when a GPS receiver (compatible with an RS-232Coutput/NMEA format/4800 bps) is connected to [DATA] jack. Andalso can transmit the position data and message to other stations.DD Position indicationq While connecting a GPS receiver, push [A• FUNC ] and[0• OPT] to enter OPTION SET MODE.w Push [YY] or [ZZ] several times to select the GPS setting.• “GPS” appears.e Rotate [VOL] to set the suitable sentence formatter for theconnecting GPS receiver.• For your position indication is necessary to select “GGA” or “RMC.”• Sentence formattersrPush [YY] twice to select the position indication.t Push [0• OPT] for 1 sec. to enter the position indication.• Latitude and longitude date appear in order as below.yAfter checking the current position, push [✱• ENT ] (or[D• CLR ]) to return to normal operating mode.IMPORTANT: When set the sentence formatter at step efor connecting GPS receiver, and already programmed yourcall sign, GPS automatic transmission is activate every 3minutes. The automatic transmission can be changed inter-val time or deactivated, if desired. (see the next page)DegreesNorth or South Minutes SecondsPushPushDegreesEast or WestMinutesSeconds12345GLLGGARMCGSAVTG678910GLL, GGAGLL, RMCGLL, GSAGLL, VTGGGA, RMC1112131415GGA, GSAGGA, VTGRMC, GSARMC, VTGGSA, VTG1617181920GLL, GGA, RMCGLL, GGA, GSAGLL, GGA, VTGGLL, RMC, GSAGLL, RMC, VTG2122232425GLL, GSA, VTGGGA, RMC, GSAGGA, RMC, VTGGGA, GSA, VTGRMC, GSA, VTG