Icom IC-V82 Instruction Manual

Also see for IC-U82: Instruction manual Addendum Specifications Service manual Instruction manual

Contents

Cloning allows you to quickly and easily transfer the pro-grammed contents from one transceiver to another trans-ceiver.D Transceiver-to-transceiver cloningq Connect the OPC-474 CLONING CABLE to the [SP] jack ofthe master and sub-transceivers.• The master transceiver is used to send data to the sub-trans-ceiver.w While pushing [A• FUNC ] and [YY],turn power ON to enter cloningmode (master transceiver only—power ON only for sub-transceiver).• “CLONE” appears and the transceiversenter the clone standby condition.e Push [PTT] on the master transceiver.• “CL OU” appears in the master transceiver’s display and S-meterindicator shows that data is being transferred to the sub-trans-ceiver.• “CL IN” appears automatically in the sub-transceiver’s displayand S-meter indicator shows that data is being received from themaster transceiver.r When cloning is finished, turn power OFF, then ON againto exit cloning mode.D Cloning using a PCPlease refer to the HELP file that comes with CS-V82CLONING SOFTWARE.NOTE: DO NOT push the [PTT] on the sub-transceiverduring cloning. This will cause a cloning error.PCTRANSCEIVERto USB portto RS-232C portOPC-478 (RS-232C type)OPC-478U (USB type)PWRFUNCAAT POWER ON68CLONING13