20MEMORY/CALL OPERATION6■ General descriptionThe transceiver has 207 memory channels including 6 scanedge memory channels (3 pairs), and 1 call channel. Each ofthese channels can be individually programmed with operat-ing frequency (pgs. 13, 14), duplex direction (p. 17) and offset(p. 17), subaudible tone encoder or tone squelch and its tonefrequency (pgs. 18, 33) and skip information* (p. 30).In addition, a total of 10 memory banks, A to J, are availablefor usage by group, etc.*except for scan edge memory channels.■ Selecting a memory channelq Push [C• MR ] to select memory mode.• “X” appears.wEnter 2 digits to select the desired memory channel (orpush the [YY]/[ZZ] keys).• The memory channels 0–9 are proceeded by a “0.”• When [VOL] is assigned as tuning dial, rotate [VOL] to selectthe memory channel. (pgs. 14, 63)■ Selecting the call channel➥ Push [B• CALL ] to select the call channel.• “C” is displayed instead of the memory channel number.• Push [D• CLR ] or [C• MR ] to select VFO or memory mode, respec-tively.Push“C” appearsCALLBTONE P.BEEP1 2PushMRCPush