D By other methodsVia the [YY]/[ZZ] keys➥ Push [YY] or [ZZ] several times to set the desired frequency.• Each push increases/decreases the frequency by the selectedtuning step. See right content for tuning step details.D Tuning step selectionThe IC-V82/U82 has 8 tuningsteps— 5, 10, 12.5, 15, 20, 25, 30and 50 kHz. The tuning step is selec-table in SET MODE.qPush [A• FUNC ] then [8• SET ] toenter SET MODE.wPush [YY] or [ZZ] several times toselect the tuning step item.eRotate [VOL] to select the desired tuning step.r Push [✱•ENT ] to exit SET MODE.[VOL]ENTFUNCASET8144 BASIC OPERATION✔ For your information— [VOL] function assignmentThe [VOL] control can be used asa tuning dial for frequency tuninginstead of [YY]/[ZZ] keys. However,while [VOL] functions as tuningdial, [YY]/[ZZ] keys functions as AFvolume control.qWhile pushing [YY] and [ZZ], turnpower ON to enter INITIAL SETMODE .w Push [YY] or [ZZ] several times toselect the dial assignment item, “tOP.”e Rotate [VOL] to select the condition.r To exit SET MODE, push [✱•ENT ].[VOL] is assigned asAF volume control.[VOL] is assigned astuning dial.[VOL]ENTPWR