26DTMF MEMORY7■ Programming a DTMF codeThe transceiver has 16 DTMF memory channels (d0 to dF)for storage of often-used DTMF codes of up to 24 digits.qPush [A• FUNC ], then push [0• OPT ] to enter OPTION SETMODE .• Rotate [VOL] to select “dtm.OF,” if necessary.wPush [0• OPT] for 1 sec. to enter the DTMF memory.• One of “d0” to “dF” appears.eRotate [VOL] to select the desired channel.rPush [0• OPT ] for 1 sec. to enter the DTMF programmingmode.• “_ _ _ _ _” appears.• Programmed memories can be cleared in this way.tPush the digit keys, [A• FUNC ], [B• CALL ], [C• MR ], [D• CLR ],[#• BANK ] and [✱•ENT ] to enter the desired DTMF code.• A maximum of 24 digits can be input.• [✱•ENT ] enters as “E”, [#• BANK ] enters as “F.”• If a digit is mistakenly input, push [MONI] or [PTT] momentarilythen repeat from step q.yPush [MONI] or [PTT] to fix the digits and exit the DTMFprogramming mode.• Programmed DTMF codes sound when [MONI] is pushed.CALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNC98741 2 3A B DC5 6 0OPT0Push for 1 sec.OPT0Push for 1 sec.FUNCAOPT0PushThe DTMF memory consists of 5 pages that are 1st to 5th, 6th to10th, 11th to 15th, 16th to 20th and 21st to 24th digits.1st page indication4th page indication 5th page indication2nd page indication 3rd page indicationAppearsAppears Blinks