246 MEMORY/CALL OPERATION■ Memory bank selectionThe IC-V82/U82 has a total of 10 banks (A to J). Regularmemory channels, 0 to 199, are assigned into the desiredbank for easy memory management.q Push [C• MR ] to select memory mode.w Push [A• FUNC ] and [#• BANK ] to se-lect memory bank condition.• Bank initial blinks.e Rotate [VOL] to select the desiredbank, A to J.• Banks that have no programmed con-tents are skipped.r Push [✱• ENT ] (or [D• CLR ]) to setthe bank.• Initial stops blinking.t Push [YY] or [ZZ] to select the contents in the bank.• No channel numbers are displayed for memory bank operation.y To return to regular memory condition, push [A• FUNC ] and[#• BANK ] to enter memory bank condition, then push[✱•ENT ] (or [D• CLR ]).■ Memory bank settingq Push [C• MR ] to select memory mode, then select the de-sired memory channel via [YY] or [ZZ].w Push [A• FUNC ] and [8• SET ] to enterSET MODE.e Push [YY] or [ZZ] several times until“bAk” appears.• “– –” indication blinks as follows.r Rotate [VOL] to select the desiredbank to be set.t Push [✱• ENT ] (or [D• CLR ]) to set the channel into thebank and return to regular memory condition.y Repeat steps q to t to set another memory channel intothe same or another bank.[VOL]ENTFUNCASET8MRCPush[VOL]ENTFUNCABANKMRCPush