256MEMORY/CALL OPERATION6■ Transferring bank contentsContents of programmed memory banks can be cleared ortransferred to another bank.INFORMATION: Even if the memory bank contents arecleared, the memory channel contents still remain pro-grammed.q Select the desired bank contents to be transferred or erased.➥ Push [C• MR ] to select memory mode.➥ Push [A•FUNC] and [#•BANK], thenrotate [VOL] to select the desiredmemory bank.• Bank initial blinks.➥ Push [✱• ENT ] (or [D• CLR ]) toselect the bank then push [YY] and[ZZ] to select the desired contents.• Bank initial stops blinking.w Push [A• FUNC ] and [8• SET ] to enterSET MODE.e Push [YY] or [ZZ] several times until“bAk” appears.• Bank initial appears.r Rotate [VOL] to select the desiredbank initial to transfer or erase.• Select “– –” indication when erasing thecontents from the bank.t Push [✱•ENT ] (or [D• CLR ]) to transfer or erase, and re-turn to regular memory condition.y Repeat steps q to t for transferring or erasing an an-other banks contents.[VOL]ENTFUNCASET8[VOL]ENTFUNCABANK