Icom IC-V82 Instruction Manual

Also see for IC-U82: Instruction manual Addendum Specifications Service manual Instruction manual

Contents

3810 PAGER/CODE SQUELCH■ Pager operationD Calling a specific stationq Program the desired code channel in advance (p. 37).w Set the operating frequency.• Set the AF and squelch to the desired level as in normal opera-tion.e Push [A• FUNC ], then push [0• OPT].• Rotate [VOL] to select “dtm.PG,” if “dtm.CS” or “dtm.OF” ap-pears.r Select the desired transmit code channel:➥ Push [0• OPT] for 1 sec. to enter the code selection con-dition.➥ Rotate [VOL] to select the desired code channel.➥ Push [✱•ENT ] to return to previous condition.• 100 MHz digit shows “P.”t Push [PTT] to transmit the pager code.y Wait for an answer back.• When the transceiver receives an answer back code, the func-tion display shows the other member’s ID or group code.u After confirming a connection, push [A• FUNC ] and [0• OPT]to enter OPTION SET MODE, then rotate [VOL] to select thecode squelch operation, or repeat the previous keyoperation again to select non-selective calling system.• DO NOT push any digit keys while code channels C0 to C6 aredisplayed, or code channel contents will be changed.i Communicate with the other party as normal: push [PTT]to transmit; release to receive.D Waiting for a call from a specific stationq Set the operating frequency.w Push [A• FUNC ], then push [0• OPT].➥ Rotate [VOL] to select “dtm.PG,” if “dtm.CS” or“dtm.OF” appears.➥ Push [✱•ENT ] to return to previous condition.• 100 MHz digit shows “P.”e Wait for a call.• When receiving a call, the caller’s ID or group code appears asshown at next page.• DO NOT push any digit keys while code channels C0 to C6 aredisplayed, or code channel contents will be changed.r Push [PTT] to send an answer back call and display theoperating frequency.t After confirming a connection, push [A• FUNC ] and [0• OPT]to enter OPTION SET MODE, then rotate [VOL] to select thecode squelch operation, or repeat the previous keyoperation again to select non-selective calling system.