Icom IC-V82 Instruction Manual

Also see for IC-U82: Instruction manual Addendum Specifications Service manual Instruction manual

Contents

298SCAN OPERATION8NOTE: Scan edges, 1A–3A/1b–3b, must be programmedin advance. Program them in the same manner as regularmemory channels. (p. 21)If the same frequencies are programmed into the scanedges, programmed scan will not proceed.■ Memory scanMemory scan repeatedly scans all programmed memorychannels, except those set as skip channels.q Push [C• MR ] to select memory mode, if necessary.• “X” appears.w Push [A• FUNC ] and [5• SCAN ] to start the scan.• To change the scan direction, push [YY] or [ZZ].• When [VOL] is assigned as tuning dial, rotate [VOL] to changethe scan direction. (pgs. 14, 63)e Push [D• CLR ] to stop the scan.• Bank scan —Select the desired bank at above step q.q Push [A• FUNC ] and [#• BANK ] to select memory bank con-dition.w Rotate [VOL] to select the desired bank, A to J.e Push [✱•ENT ] (or [D• CLR ]) to set the bank.Push SCANFUNCA 5MONICALLDUP SCANPRIO ENTSET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPMR CLRFUNCPWR98741 2 3A B DC5 6 0