Icom IC-V82 Instruction Manual

Also see for IC-U82: Instruction manual Addendum Specifications Service manual Instruction manual

Contents

277DTMF MEMORY7■ Transmitting a DTMF codeD Using a DTMF memory channelqPush [A• FUNC ], then push [0• OPT ] to enter OPTION SETMODE .• Rotate [VOL] to select “dtm.OF,” if necessary.wPush [0• OPT] for 1 sec. to enter the DTMF memory.e Rotate [VOL] to select the desired channel.r Push [MONI] or [PTT] to exit the DTMF memory mode.tWhile pushing [PTT], push [MONI] to transmit the selectedDTMF memory.• After the DTMF code is transmitted, the transceiver returns to re-ceive automatically.D Manual DTMF code transmissionWhile pushing [PTT], push digit keys, [A• FUNC ], [B• CALL ],[C•MR], [D•CLR], [#•BANK] and [✱•ENT ] to transmit a DTMFcode manually.• [✱•ENT ] transmits as “E”, [#• BANK ] transmits as “F.”■ DTMF transmission speedWhen slow DTMF transmission speeds are required withDTMF memory transmission (as for some repeaters), thetransceiver’s rate of DTMF transmission can be adjusted.qWhile pushing [YY] and [ZZ], turn thepower on to enter INITIAL SET MODE.wPush [YY] or [ZZ] several times until“dtd” appears.eRotate [VOL] to select the desiredDTMF transmission speed.• Four speeds are available: “1” (100msec. intervals) is the fastest; “5” (500msec. intervals) is the slowest.rPush [✱•ENT ] to exit INITIAL SET MODE.[VOL]ENTPWRUSING INITIAL SET MODEOPT0Push for 1 sec.FUNCAOPT0Push